Nuclear Science and Techniques

《核技术》(英文版) ISSN 1001-8042 CN 31-1559/TL     2019 Impact factor 1.556

Nuclear Science and Techniques ›› 2012, Vol. 23 ›› Issue (2): 70-74 doi: 10.13538/j.1001-8042/nst.23.70-74

• SYNCHROTRON TECHNOLOGY AND APPLICATIONS • Previous Articles     Next Articles

Development of a PSD-based photon beam position measurement system

XIAO Yunyun SUN Baogen* GU Liming LU Ping WANG Jigang TANG Leilei YANG Yongliang ZHOU Zeran XU Hongliang   

  1. NSRL, School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230029, China
XIAO Yunyun, SUN Baogen, GU Liming, LU Ping, WANG Jigang, TANG Leilei, YANG Yongliang, ZHOU Zeran, XU Hongliang. Development of a PSD-based photon beam position measurement system.Nuclear Science and Techniques, 2012, 23(2): 70-74     doi: 10.13538/j.1001-8042/nst.23.70-74

Abstract:

As an important part of the beam diagnostic system, the synchrotron light beam position measurement has a very high value in the high quality and high stability light source applied research. A new photon beam position monitor based on position-sensitive detector (PSD) has been developed to measure the photon beam position in vertical and horizontal directions at the same time at HLS (Hefei Light Source). The new PBPM based on the PSD has fast response speed, high sensitivity and wide dynamic range. This PBPM system also includes the C4674 signal processing circuit, NI USB-9215 data acquisition device and the LABVIEW data acquisition program. This PBPM system has been calibrated vertically and horizontally on-line, and then has been applied in the beam line B3EA of HLS to measure the position of the synchrotron light. As the results shown, the resolution of the system is better than 3 mm.

Key words: Photon beam position monitor, Position-sensitive detector, Calibration