# Nuclear Science and Techniques

《核技术》(英文版) ISSN 1001-8042 CN 31-1559/TL     2019 Impact factor 1.556

Nuclear Science and Techniques ›› 2019, Vol. 30 ›› Issue (6): 92

• NUCLEAR ENERGY SCIENCE AND ENGINEERING •

### Calculation of dpa rate in graphite box of Tehran research reactor (TRR)

1. 1 Reactor and Nuclear Safety Research School, Nuclear Science and Technology Research Institute, Tehran, Iran
2 Department of Physics, Arak University, Arak, Iran
• Received:2018-10-16 Revised:2019-01-23 Accepted:2019-01-26
• Contact: Mohsen Asadi Asadabad E-mail:msasadi@aeoi.org.ir
PDF ShareIt Export Citation
Citations
Altmetrics

Abstract: Radiation damage is an important factor that must be considered while designing nuclear facilities and nuclear materials. In this study, radiation damage is investigated in graphite, which is used as a neutron reflector in the Tehran Research Reactor (TRR) core. Radiation damage is shown by displacement per atom (dpa) unit. A cross section of the material was created by using the SPECOMP code. The concentration of impurities present in the non-irradiated graphite was measured by using the ICP-AES method. In the present study the MCNPX code had identified the most sensitive location for radiation damage inside the reactor core. Subsequently, the radiation damage (spectral-averaged dpa values) in the aforementioned location was calculated by using the SPECTER, SRIM Monte Carlo codes, and Norgett, Robinson and Torrens (NRT) model. The results of “Ion Distribution and Quick Calculation of Damage” (QD) method groups had a minor difference with the results of the SPECTER code and NRT model. The maximum radiation damage rate calculated for the graphite present in the TRR core was 1.567 × 10−8 dpa/s. Finally, hydrogen retention was calculated as a function of the irradiation time.