EAST-NBI反向电子吸收板换热计算与分析

doi:10.11889/j.0253-3219.2016.hjs.39.100602

Nuclear Techniques ›› 2016, Vol. 39 ›› Issue (10): 100602-100602.doi: 10.11889/j.0253-3219.2016.hjs.39.100602

• NUCLEAR ENERGY SCIENCE AND ENGINEERING • Previous Articles Next Articles

Analysis of heat transfer capacity of electron dump on EAST-NBI

XU Yongjian¹, LI Xiang^1,2, HU Chundong¹, YU Ling¹, TAO Ling¹, XIE Yahong¹, JIANG Caichao¹, GU Yuming¹, LI Jun¹

1 Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031, China;
2 University of Science and Technology of China, Hefei 230026, China

Received:2016-06-23 Revised:2016-08-19 Online:2016-10-10 Published:2016-10-13
Supported by:
Supported by National Natural Science Foundation of China (No.11405207, No.11505225)

Abstract

Abstract:

Background: Neutral beam injection is one of the main auxiliary heating methods in controllable nuclear fusion experiment. The positive ion source is adopted in the EAST-NBI (Experimental Advanced Superconducting Tokamak-Neutral Beam Injection) device, and during its operation, there is a large energy deposition on ion source components, especially on the electron dump. According to previous research, when beam power is 3.5 MW, the average power density deposited on electron dump is around 4.4 MW·m^-2, which may cause great burden for its heat transfer capacity. Purpose: Research on the heat transfer conditions of electron dump is of great significance. Methods: A numerical simulation method is adopted to calculate the heat transfer effect with the change of beam power and inlet pressure of cooling water, and the maximum operating time of electron dump is obtained. Results: The results show that the heat transfer effect decreases with beam power growth, and by enhancing the inlet pressure of cooling water via booster pump, heat transfer capacity gets better to some extent, which can extend the maximum operating time of electron dump. Conclusion: This research can guide EAST-NBI ion source to operate safely and steadily. Moreover, it can lay a foundation for increasing heat transfer capacity via structure optimization in future work, which is meaningful for the development of long pulse and high power ion source.

Key words: Neutral beam injection, Electron dump, Heat transfer, Maximum operating time, Numerical simulation

CLC Number:

TL67

XU Yongjian, LI Xiang, HU Chundong, YU Ling, TAO Ling, XIE Yahong, JIANG Caichao, GU Yuming, LI Jun. Analysis of heat transfer capacity of electron dump on EAST-NBI[J].Nuclear Techniques, 2016, 39(10): 100602-100602.

References

1 Hu C D. First achievement of plasma heating for EAST neutral beam injector[J]. Plasma Science and Technology, 2015, 17(1):1-3. DOI:1009-0630/17/1/01

2 Liang L Z, Hu C D, Xie Y L, et al. Calculation of beam intensity distribution for the neutral beam injection in EAST[J]. Plasma Science and Technology, 2011, 13(4):502-505. DOI:10.1088/1009-0630/13/4/22

3 Xie Y L, Hu C D, Liu S, et al. The R&D progress of 4MW EAST-NBI high current ion source[J]. Review of Scientific Instruments, 2014, 85(2):02B315. DOI:10.1063/1.4916457

4 Xu Y J, Hu C D, Xie Y L, et al. Analysis of the cooling water temperature rise of accelerating electrodes in EAST neutral beam injector beam extraction[J]. Chinese Physics Letters, 2013, 30(3):032901. DOI:10.1088/0256-307x/30/3/032901

5 Xu Y J, Hu C D, Yu L, et al. Progress of beam diagnosis system for EAST neutral beam injector[J]. Review of Scientific Instruments, 2016, 87(2):02B934. DOI:10.1063/1.4936998

6 陶玲, 胡纯栋, 谢远来, 等. 全超导托卡马克中性束注入系统离子吞食器工程设计[J]. 强激光与粒子束, 2013, 25(10):2687-2692. DOI:10.3788/HPLPB20132510.2687 TAO Ling, HU Chundong, XIE Yuanlai, et al. Engineering design of ion dump for EAST neutral beam injection system[J]. High Power Laser and Particle Beams, 2013, 25(10):2687-2692. DOI:10.3788/HPLPB20132510.2687

7 胡立群, 张晓东, 姚若河. EAST托卡马克的中性束注入方案[J]. 核技术, 2006, 29(2):149-152. DOI:10.3321/j.issn:0253-3219.2006.02.018 HU Liqun, ZHANG Xiaodong, YAO Ruohe. EAST neutral beam injection project for EAST tokamak[J]. Nuclear Techniques, 2006, 29(2):149-152. DOI:10.3321/j.issn:0253-3219.2006.02.018

8 Hu C D, Xie Y L, Liu S, et al. First plasma of megawatt high current ion source for neutral beam injector of the experimental advanced superconducting tokamak on the test bed[J]. Review of Scientific Instruments, 2011, 82(2):023303. DOI:10.1063/1.3545843

9 Hu C D, Xie Y H, Xie Y L, et al. Performance of positive ion based high power ion source of EAST neutral beam injector[J]. Review of Scientific Instruments, 2016, 87(2):02B301. DOI:10.1063/1.4931709

10 胡纯栋, 许永建. EAST中性束注入器最新研制进展[J]. 核技术, 2015, 38(11):110603. DOI:10.11889/j.0253-3219.2015.hjs.38.110603 HU Chundong, XU Yongjian. The latest development of EAST neutral beam injector[J]. Nuclear Techniques, 2015, 38(11):110603. DOI:10.11889/j.0253-3219.2015.hjs.38. 110603

11 Chen Y Q, Hu C D, Liu Z M, et al. Study the characteristic of the hot cathode of high current ion source[J]. Journal of Fusion Energy, 2013, 32(5):536-539. DOI:10.1007/s10894-013-9609-x

12 Li X, Xu Y J, Hu C D, et al. Analysis of energy deposition on ion source components of EAST neutral beam injector[J]. Fusion Science and Technology, 2016, 70(3):429-434. DOI:10.13182/FST15-251

13 何杰, 夏晓彬, 蔡军, 等. 2 MW液态钍基熔盐实验堆主屏蔽温度场分析[J]. 核技术, 2016, 39(4):040601. DOI:10.11889/j.0253-3219.2016.hjs.39.040601 HE Jie, XIA Xiaobin, CAI Jun, et al. Temperature field analysis for the main shielding of the 2-MW thorium-based molten salt experimental reactor[J]. Nuclear Techniques, 2016, 39(4):040601. DOI:10.11889/j.0253-3219.2016.hjs.39.040601

14 陈俞钱, 谢亚红, 胡纯栋, 等. EAST NBI强流离子源反向电子流沉积计算[J]. 原子能科学技术, 2015, 49(增):497-501. DOI:10.7538/yzk.2015.49.S1.0497 CHEN Yuqian, XIE Yahong, HU Chundong, et al. Calculation of deposited energy of backstream electrons for EAST NBI high current ion source[J]. Atomic Energy Science and Technology, 2015, 49(Suppl):497-501. DOI:10.7538/yzk.2015.49.S1.0497

15 王福军. 计算流体动力学分析[M]. 北京:清华大学出版社, 2004 WANG Fujun. Computational fluid dynamics analysis[M]. Beijing:Tsinghua University Press, 2004

16 陶文铨. 数值传热学[M]. 西安:西安交通大学出版社, 2001 TAO Wenshuan. Numerical heat transfer[M]. Xi'an:Xi'an Jiaotong University Press, 2001

17 徐志明, 刘枫, 朱宏娟. 内置螺旋线圈换热管换热分析及数值模拟[J]. 东北电力大学学报, 2014, 34(5):5-10. DOI:10.3969/j.issn.1005-2992.2014.05.002 XU Zhiming, LIU Feng, ZHU Hongjuan. Thermal analysis and numerical simulation for heat exchange tube with wire coil internally installed[J]. Journal of Northeast Dianli University, 2014, 34(5):5-10. DOI:10.3969/j.issn.1005-2992.2014.05.002

[1]	Chao ZHU Jun ZHANG Aiming CHEN. The adsorption transfer mechanism of U and ²³⁸Pu in sandy aquifers [J]. Nuclear Techniques, 2019, 42(9): 0-090301-9.
[2]	Yushuang CHEN, Jian TIAN, Haihua ZHU, Yuan FU, Naxiu WANG. Experimental study on turbulent convective heat transfer of molten salts in circular tubes [J]. Nuclear Science and Techniques, 2019, 42(4): 40601-040601.
[3]	LU Zhiwei, ZHANG Yongdong, LI Lei, LIU Tong, XUE Jiaxiang. Heat transfer performance of inert matrix dispersion pellet based on finite element analysis [J]. Nuclear Techniques, 2018, 41(9): 90604-090604.
[4]	XIE Chengli, DENG Feiyun, WANG Shuai. Numerical study of a proton exchange membrane fuel cell under dynamic loading [J]. Nuclear Techniques, 2018, 41(6): 60501-060501.
[5]	HU Jian, SHI Xingwei, LEI Lei, XU Chao, WEN Lijing, QIAO Xuedong. Assessment of heat transfer phenomenon scaling distortion in CERT [J]. Nuclear Techniques, 2018, 41(3): 30602-030602.
[6]	MIAO Hongkang, CHEN Yushuang, LYU Liushuai, WANG Naxiu. Numerical simulation study on heat transfer characteristics of new heat exchange fins [J]. Nuclear Techniques, 2018, 41(10): 100601-100601.
[7]	WU Liang, XU Guoliang, ZHOU Yifu, ZHANG Chuanjia, MAO Shifeng, LUO Zhengping, GUO Yong, PENG Xuebing, YE Minyou. Simulation study of core W impurity concentration with Ne seeding for CFETR [J]. Nuclear Techniques, 2018, 41(1): 10602-010602.
[8]	FAN Qiwei, ZHU Haihua, CHEN Yushuang, WANG Naxiu, ZHU Zhiyuan. Heat transfer characteristics of molten salt in finned tube [J]. Nuclear Techniques, 2017, 40(7): 70602-070602.
[9]	GU Chenguang, ZENG Guangli, YANG Xiong, ZHONG Yang, DING Dong. Four-point bending experiment and simulation of dog bone nuclear graphite [J]. Nuclear Techniques, 2017, 40(5): 50601-050601.
[10]	JING Jianping, JIA Bin, LEI Lei, BI Jinsheng, ZUO Jiaxu, LIU Yaning, ZHANG Chunming, ZHANG Dalin. Characteristic of core flow and heat transfer of different fuel ball arrangement modes in molten salt reactor [J]. Nuclear Techniques, 2017, 40(2): 20602-020602.
[11]	ZHANG Pan, XU Chao, WEN Lijing, HU Wenchao, LIU Yusheng, LI Congxin. Numerical simulation of flow and heat transfer characteristic in passive residual heat removal heat exchanger [J]. Nuclear Techniques, 2017, 40(10): 100602-100602.
[12]	AN Heng, XUE Yuxiong, YANG Shengsheng, ZHUANG Kai, QIN Xiubo, WANG Jun. Analysis and simulation of dielectric deep charging effect for satellites [J]. Nuclear Techniques, 2016, 39(12): 120502-120502.
[13]	HE Peifeng, XU Bin, LUO Ying, YU Hao, MA Ziqi, SUN Shanwen, ZHOU Jinxiong. Numerical simulation on the convective heat transfer of compressive gas in ACP100 integrated head package [J]. Nuclear Techniques, 2016, 39(10): 100601-100601.
[14]	GE Zhihao, PENG Yongsheng, LYU Yijun, DENG Weiping, ZHAO Pinghui. Turbulent heat transfer of liquid metal inside the sub-channels of reactor core [J]. Nuclear Techniques, 2015, 38(9): 90603-090603.
[15]	ZHOU Jinhao, SUN Bo, SHE Changfeng, DOU Qiang, LONG Dewu, LI Qingnuan, WU Guozhong. Experimental research on the formation and controlling of molten salt frozen-wall [J]. Nuclear Techniques, 2015, 38(7): 70602-070602.

Analysis of heat transfer capacity of electron dump on EAST-NBI

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Metrics

Comments

Recommended 10