PCS表面液膜覆盖率对安全壳完整性影响分析

doi:10.11889/j.0253-3219.2017.hjs.40.010602

Nuclear Techniques ›› 2017, Vol. 40 ›› Issue (1): 10602-010602.doi: 10.11889/j.0253-3219.2017.hjs.40.010602

• NUCLEAR ENERGY SCIENCE AND ENGINEERING • Previous Articles Next Articles

The influence analysis of PCS surface liquid film coverage on the containment integrity

SHI Xingwei, LEI Lei, LAN Bing, HU Jian, QIAO Xuedong, JING Jianping

Nuclear and Radiation Safety Center, Ministry of Environmental Protection, Beijing 100082, China

Received:2016-08-19 Revised:2016-10-11 Online:2017-01-10 Published:2017-01-11
Supported by:
Supported by National Science and Technology Major Project (No. 2015ZX06002007)

Abstract

Abstract:

Background: The containment is the last shielding to protect radioactive fission products under severe accident conditions from being released to the atmosphere. Purpose: In order to figure out the failure margin under accident conditions, it is necessary to research and analyze the effects of the surface liquid film coverage on the containment integrity for a Passive Containment Cooling System (PCS). Methods: The PCS thermal-hydraulic model has been built with passive containment analysis code in large power passive reactor. Based on the reference case of double ended guillotine (DEG) on a cold leg, both the water distribution tube failure and the spray pipe pluggage together with water distribution tube failure have been carried out, respectively. Results: The analysis results show that the containment will not fail due to overpressure and over temperature in short time in both failure cases when the water film coverage is larger than 35%, while it will fail in 24 h after accident when the results of the liquid film coverage is lower than 45%. Conclusion: It can be concluded that the containment will not fail in 24 h after accident with the liquid velocity greater than 61.76 m³·h^-1 and the liquid film coverage area greater than 45%.

Key words: Passive containment analysis code, Passive containment cooling system, DEG, Main steam line break (MSLB), Liquid film coverage

CLC Number:

TL364.4

SHI Xingwei, LEI Lei, LAN Bing, HU Jian, QIAO Xuedong, JING Jianping. The influence analysis of PCS surface liquid film coverage on the containment integrity[J].Nuclear Techniques, 2017, 40(1): 10602-010602.

References

1 邹杰, 佟立丽, 曹学武. 典型严重事故非能动安全壳冷却系统效果分析[J]. 原子能科学技术, 2014, 48(增1):362-368. DOI:10.7538/yzk.2014.48.S0.0362. ZOU Jie, TONG Lili, CAO Xuewu. Assessment of passive containment cooling system performance during severe accident[J]. Atomic Energy Science and Technology, 2014, 48(Suppl 1):362-368. DOI:10.7538/yzk.2014.48.S0.0362.

2 韦胜杰. 非能动安全壳冷却系统(PCCS)水膜流动行为及冷却能力实验研究[D]. 上海:上海交通大学, 2012. WEI Shengjie. Experimental investigation on flow characteristics and heat transfer of falling water film of passive containment cooling system (PCCS)[D]. Shanghai:Shanghai Jiao Tong University, 2012.

3 叶成, 郑明光, 王勇, 等. AP1000安全壳厚度对传热性能的影响[J]. 原子能科学技术, 2014, 48(3):458-461.DOI:10.7538/yzk.2014.48.03.0457. YE Cheng, ZHENG Mingguang, WANG Yong, et al.Effect of AP1000 steel containment thickness on heat transfer performance[J]. Atomic Energy Science and Technology, 2014, 48(3):458-461. DOI:10.7538/yzk. 2014.48.03.0457.

4 马柏松, 庄亚平, 郑福涛. 海阳核电一期工程严重事故下非能动安全壳冷却能力分析[J]. 核科学与工程, 2014, 34(4):530-536. MA Baisong, ZHUANG Yaping, ZHENG Futao.Analysis for the passive containment cooling system of Haiyang NPP under severe accident condition[J]. Nuclear Science and Engineering, 2014, 34(4):530-536.

5 叶成, 郑明光, 王勇, 等. AP1000非能动安全壳冷却水WGOTHIC分析[J]. 原子能科学技术, 2013, 47(12):2225-2230. DOI:10.7538/yzk.2013.47.12.2225. YE Cheng, ZHENG Mingguang, WANG Yong, et al. WGOTHIC analysis on AP1000 passive containment cooling water[J]. Atomic Energy Science and Technology, 2013, 47(12):2225-2230. DOI:10.7538/yzk.2013.47.12. 2225.

6 王国栋. 应用GOTHIC8.0程序分析AP1000核电厂PCS传热传质过程[J]. 原子能科学技术, 2015, 49(1):83-88. DOI:10.7538/yzk.2015.49.01.0083. WANG Guodong. Analysis of heat and mass transfer process for AP1000 NPP PCS using GOTHIC8.0 code[J]. Atomic Energy Science and Technology, 2015, 49(1):83-88. DOI:10.7538/yzk.2015.49.01.0083.

7 Nuclear Regulatory Commission. Final safety evaluation report for AP1000 related to certification of the AP1000 standard design[R]. Chapter 3/6/19, Washington D C:Nuclear Regulatory Committee, 2004.

[1]	Peng YAN,Gengyang HUO,Xinxing CHU,Gongjun ZHANG,Bin LI,Xingfei ZHOU. The effect of graphene oxide nanosheets on the dissociation of amyloid fibers [J]. Nuclear Techniques, 2019, 42(9): 0-090501-6.
[2]	Wei NIE,Zijian XU,Xulei TAO,Renzhong TAI,Zhiyuan ZHU. Effects of the probe divergence degree on the imaging quality of multi-slice 3D ptychography [J]. Nuclear Techniques, 2019, 42(5): 50101-050101.
[3]	HU Jian, SHI Xingwei, LEI Lei, XU Chao, WEN Lijing, QIAO Xuedong. Assessment of heat transfer phenomenon scaling distortion in CERT [J]. Nuclear Techniques, 2018, 41(3): 30602-030602.
[4]	LIN Chenglie, LI Jiang, ZHOU Yi, SUN Yanhong, WANG Lihua, HU Jun, FAN Chunhai. Autophagy-based mechanistic understanding of healthcare science [J]. Nuclear Techniques, 2017, 40(2): 20501-020501.
[5]	ZHOU Tao, LI Bing, QI Shi, MA Dongliang, HUANG Yanping. Application of fuzzy nearness method in the selection of heat transfer relationship of supercritical water reactor [J]. Nuclear Techniques, 2017, 40(12): 120604-120604.
[6]	YE Jianfeng, PEI Yuanji. Study on radiation degradation effect of PTFE by electron beam [J]. Nuclear Techniques, 2015, 38(1): 10201-010201.
[7]	WU Ling, HUANG Min, XIE Yan, HE Jiang, WANG Yan, GAO Peng, FU Yi. Electron beam irradiation induced degradation of polyvinyl alcohol in aqueous solution [J]. Nuclear Techniques, 2013, 36(8): 80302-080302.

The influence analysis of PCS surface liquid film coverage on the containment integrity

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 7

Metrics

Comments

Recommended 10